Road Maintenance Skid Steer Loader
The mini skid steer loaders are multi-purpose machines that, with accessories like a closed sweeper, milling machine, hydraulic crushing hammer, manhole milling machine, disk trencher, and vibration compactor, can efficiently complete a variety of complex road maintenance tasks. Their powerful multifunctionality and flexibility make maintenance operations more comprehensive, fast, and precise, improving working efficiency and reducing costs.
Introduction of the product
1.Strong versatility: Different accessories (such as a sweeper, milling machine, crushing hammer, etc.) can be swapped out as needed to complete various road maintenance tasks, such as sweeping, milling, repairing, and ditching.
2.Simple operation: With its flexible design, it's easy to operate and can adapt to different working conditions, reducing reliance on multiple pieces of equipment.
3.High efficiency and energy-saving: The mini skid steer loader's efficient performance boosts work speed and accuracy, saving both time and labor costs.
4.Small footprint, highly adaptable: The compact design allows it to work flexibly in narrow roads or complex environments, making it especially suitable for urban and tight-space road maintenance.
5.Reduced equipment requirements: One machine with a variety of accessories reduces the need for multiple types of equipment, cutting down on maintenance and management costs.
Road maintenance
Sweeper:The sweeper is used for cleaning roads, municipal administration areas, ports, plazas, and factory areas. It can move forward or backward to clean dust and waste. It provides rapid cleaning for parking lots, sidewalks, docks, and warehouses. It can also be used to spread materials evenly. Model numbers are 72 inches and 84 inches. The efficiency is 1200m/h, and the capacity is 0.47L. The sweeper for the skid steer loader can sweep the surface of milled roads and is part of mechanized construction. |
|
| Milling planer:The mini skidloader can be equipped with this milling planer. The milling planer has two types: standard and large-flow models. With a direct-drive and high-torque hydraulic motor, and a hydraulic side shifter, the milling planer can mill corners and curb sides. The milling planer can be controlled to maintain the same cutting depth and is easy to maintain. It allows for easy and fast planing of bitumen and concrete floors (municipal, highway, freeway, and airport). Standard models are 18 inches (457mm), 24 inches (610mm), and 40 inches (1016mm). All these models require a skid steer loader with a large flow. |
Hydraulic hammer:The skid steer loader can be equipped with this hydraulic hammer. The hydraulic hammer can be used for breaking cement and asphalt pavement, and it is very fast and efficient, with a breaking efficiency of up to 20m²/hour. At the same time, the hydraulic hammer can also be used for demolition in construction areas. It is suitable for road, municipal, and other uses. Depending on the loader model, there are four different hydraulic hammers and five different types of shovels (Slotted, Shaped, Pyramid, Wedged, and Cone). |
|
| Manhole cover type milling planer:This attachment is mainly used for cutting damaged asphalt around manhole covers on municipal roads. To use it, first open the manhole cover and fix the positioner in the well frame. Adjust the cutter to the asphalt road, then begin cutting until reaching the soil layer. Finally, lift the positioning shaft, and the positioner along with the cut asphalt portion will be lifted. |
Wheel trencher:The skid steer loader can be equipped with this wheel trencher. When you need to lay water pipes, gas pipes, cables, or repair highways, the wheel trencher can help save time and labor. Compared to a hydraulic hammer, the wheel trencher is more accurate in cutting asphalt, frozen ground, or wire netting, with a maximum ditching depth of 610mm. |
|
| Vibratory roller:The skid steer loader can be equipped with this vibratory roller. The vibratory roller can move forward and backward to compact road surfaces, channels, and asphalt potholes. The vibration drum can be side-shifted to make uneven areas more compacted. There are four models: 60 inches, 66 inches, 72 inches, and 84 inches. |
Parameters
Major | WT400 | WT730 | WT830 | WT930 | WT750D | WT870 | WT1100 | WT1200 | WT1405 | WT1605A | |
A | Overall Operating Height(mm) | 2666 | 3897 | 3857 | 3577 | 3710 | 4143 | 4347 | |||
B | Height To Bucket Hinge Pin(mm) | 2000 | 2982 | 2982 | 2729 | 2885 | 3205 | 3407 | |||
C | Height To Top Of Cab (mm) | 1520 | 2090 | 2090 | 1552/1420 | 2010 | 2065 | 2075 | |||
D | Height ToBottom OfLevel Bucket(mm) | 1868 | 2855 | 2855 | 2531 | 2726 | 3010 | 3217 | |||
E | Overall Length Without Bucket(mm) | 2015 | 2536 | 2536 | 2637 | 2850 | 2857 | 3051 | |||
F | Overall Length With Bucket (mm) | 2500 | 3352 | 3302 | 3367 | 3370 | 3649 | 3835 | |||
G | Dumping Height (mm) | 1468 | 2266 | 2298 | 2044 | 2190 | 2460 | 2679 | |||
H | DumpingReach (mm) | 701 | 662 | 601 | 449 | 430 | 590 | 868 | |||
I | Rollback Of Bucket On Ground(°) | 30 | 25 | 25 | 38 | 25 | 30 | 26 | |||
J | Ground Clearance(mm) | 177 | 210 | 200 | 144 | 204 | 195 | 220 | |||
K | Angle Of Departure(°) | 28 | 30 | 32 | 24 | 26 | 26 | 26 | |||
L | Front Turning Radius without Bucket(mm) | 860 | 1252 | 1290 | 1299 | 1188 | 1338 | 1390 | |||
M | Front Turning Radius(mm) | 1518 | 2052 | 2036 | 2059 | 1983 | 2174 | 2246 | |||
N | Rear Turning Radius(mm) | 1210 | 1516 | 1516 | 1580 | 1634 | 1746 | 1898 | |||
0 | Width (mm) | 1166 | 1730 | 1818 | 1806 | 1705 | 1798 | 1864 | |||
P | Bucket Width (mm) | 1250 | 1800 | 1880 | 2000 | 1740 | 1910 | 1980 | |||
Technical Specification
ltem | WT400 | WT730 | WT830 | WT930 | WT750D | WT870 | WT1100 | WT1200 | WT1405 | WT1605A |
EngineModel | QC3B2 | China Engine | China Engine | China Engine | China Engne | ChinaEngine | China Engne | China Engne | China Engne | China Engne |
RatedPower(KW) | 26 | 39 | 45 | 45 | 45 | 45 | 65 | 65 | 85 | 85 |
RotatingSpeed(rpm) | 2800 | 2650 | 2650 | 2650 | 2650 | 2300 | 2200 | 2200 | 2200 | 2200 |
Max.Speed(km/h) | 6.2 | 12 | 11.2 | 11.2 | 11.4/9.8 | 11.5 | 11.2/22.4 | 11.2/22.4 | 10.1/18.5 | 10.1/18.5 |
Tire | 23*8.5-12 | 10-16.5 | 10-16.5 | 12-16.5 | 250-15/23X10-12 | 10-16.5 | 12-16.5 | 12-16.5 | 12-16.5 | 12-16.5 |
OperatingLoad(kg) | 370 | 730 | 830 | 930 | 860 | 870 | 1100 | 1200 | 1400 | 1600 |
Max.Loading(kg) | 740 | 1460 | 1660 | 1860 | 1720 | 1740 | 2200 | 2400 | 2800 | 3200 |
LiftingType | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial | Radial |
TotalCyclingTime(s) | 9 | 10.2 | 10.2 | 10.2 | 8.6 | 11 | 9 | 9 | 9.5 | 9.5 |
BucketCapacity(m3) | 0.16 | 0.47 | 0.47 | 0.51 | 0.44/0.3 | 0.42 | 0.53 | 0.53 | 0.55 | 0.55 |
PressureOfWorkingSystem(bar) | 200 | 180 | 180 | 180 | 180 | 200 | 235 | 235 | 235 | 235 |
RatedFlux(L/min) | 43 | 80 | 80 | 80 | 80 | 80 | 76 | 76 | 75 | 75 |
HighFlowFlux(Lmin) | without | without | without | without | without | without | 140 | 140 | 150 | 150 |
FuelTankCapacity(L) | 65 | 81 | 81 | 81 | 75 | 85 | 106 | 106 | 86 | 86 |
Self-weightWithBucket(kg) | 1410 | 2850 | 2980 | 3230 | 3230 | 3050 | 3810 | 3970 | 4080 | 4260 |
ControlType | Joystick | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ |
